EEG is now an Ai-Media company, bringing leading, vertically-integrated solutions and services to customers around the world. Read more here.

iCap Connect AV650: AV650 2.0.0 to 2.0.1 Patch

Back to Downloads

Release Notes:

AV650 users running system software build 2.0.0 are advised to apply this patch in order to address a bug that can lead to the unit's disk drive becoming full.

Upgrade Instructions

To apply the update through the front-panel USB port:

  • Download the update file (av650_2.0.1_hd492_5.0.1_patch.tar.bz2) to your computer.
  • Copy the file to a USB flash drive
  • Insert the drive in the front-panel USB slot of the encoder.
  • Go to System Setup | Update on the front-panel LCD menu and press OK when the name of the update is displayed.
  • The update should take less than 15 seconds to run and the unit will remain powered on when the update completes.
  • Remove the USB drive.
  • Once the LCD screen indicates that the update is complete, press the X button to return to the main screen.
  • The system software build will now be 2.0.1.

To apply the product update through the AV650 Web Portal:

  • Download the update file (av650_2.0.1_hd492_5.0.1_patch.tar.bz2) to your computer.
  • Navigate to the Update page the AV650 Web Portal and click the Choose File button.
  • Select the update file you just saved and then click the Upload button to load the file onto the unit.
  • After the update finishes uploading, click the Proceed button to begin the update process.
  • The update should take less than 15 seconds to run and the unit will remain powered on when the update completes.
  • The system software build will now be 2.0.1.